Branch: GB Stone Inc., Caledon
0 CAD 0.00
items in your cartto quote To cart
Ooops no items were found.
Try something else.
Ok
Loading…
0
Kwik Mix

STONE BOND 66LB

Category KWIK MIX
120030
Kwik Mix

STONE BOND 66LB

Item Code: 120030
Category KWIK MIX

Description

Stone Bond is designed for the installation of manufactured and natural stone veneers.

SUGGESTED USES
Stone Bond can be used to adhere stone vertically and horizontally, as a scratch coat, and as a mortar joint grout.

  • Adhere Stone Vertically
  • Adhere Stone Horizontally
  • Scratch Coat
  • Mortar Joint Grout

One 66lb (30kg) bag will cover approximately 13 sqft (1.2 sq.m.) at ½” (13mm) thickness. Coverage will vary with joint width and depth.

Mixing
  1. Add approximately 4 litres of water into a mixer for each 30kg (66lb) bag.
  2. Mix Stone Bond thoroughly.
  3. Adjust water as needed.

Note: Use only clean potable water.

Stone Installation 


Consult stone/veneer manufacturer for proper substance preparation and installation.

  1. Dampen properly prepared substrate for good stone adhesion.
  2. Apply ½ – ¾ inch (13-19mm) or mortar to the back of each veneer. 100% coverage is required on the back
  3. Press coated veneer firmly on substrate until mortar squeezes out around all edges of the veneer.
  4. Hold in place for 10 seconds. Ensure 100% contact between substrate and back of veneer.

Note: Not recommended for use where stone is very smooth or has a polished back.

Finishing Joints
  1. Use a grout bag to fill in joints.
  2. Finish joints, when thumb-print dry, with a metal or brush tool and dry brush any accidental smears.
For best results:
Do’s
  • Use in temperatures above 5°C (41°F).
  • Keep from freezing.

Stone Bond mortar mix is a construction grade mix designed for the installation of manufactured and natural stone. It can be used as a bond coat, scratch and brown coat and a mortar joint grout over concrete and masonry surfaces or galvanized, expanded metal lath.

Specifications

Weight

66lb

Brand

KWIK MIX

Category

KWIK MIX

Minimum quantities may apply;

  • Usually if the product comes with a variety of sizes throughout the bundle, it will be sold by the layer, which is a flat horizontal layer of the bundle. A layer is usually around 10 square feet but varies depending on the product.
  • Usually if the product comes with a single size throughout the bundle, it will be sold by the piece and not have a minimum quantity.
  • Some products are only sold in full bundles.

Additional charges may apply;

  • All stone material comes on a wooden pallet for transport and loading/unloading purposes. The amount of pallets required will depend on how much product is ordered.
  • Deliveries must include pallets, for pickup it is still recommended but not always required.
  • Pallets are charged at $40.00 and refundable at $35.00 upon return.
  • If pallets are removed from a delivery order, the order cannot be shipped and someone will contact you about shipping or pickup arrangements.

Color Variances;

  • All concrete products have a color variance between different dye lots.
  • Many concrete products come with a color range, which blends multiple colors together within the stone. Because of this some pieces may come out differently than others.
  • It is always best to come in and get a physical sample before making a large order.
Call for price
Starting from
CAD 59.99 / BAG
/
Additional fees may apply
Enter QTY As EACH On Total
TOTAL
Check stock in other branches
Your collection branch is GB Stone Inc., Caledon
Kwik Mix

STONE BOND 66LB

Category KWIK MIX
120030
Kwik Mix

STONE BOND 66LB

Item Code: 120030
Category KWIK MIX

Description

Stone Bond is designed for the installation of manufactured and natural stone veneers.

SUGGESTED USES
Stone Bond can be used to adhere stone vertically and horizontally, as a scratch coat, and as a mortar joint grout.

  • Adhere Stone Vertically
  • Adhere Stone Horizontally
  • Scratch Coat
  • Mortar Joint Grout

One 66lb (30kg) bag will cover approximately 13 sqft (1.2 sq.m.) at ½” (13mm) thickness. Coverage will vary with joint width and depth.

Mixing
  1. Add approximately 4 litres of water into a mixer for each 30kg (66lb) bag.
  2. Mix Stone Bond thoroughly.
  3. Adjust water as needed.

Note: Use only clean potable water.

Stone Installation 


Consult stone/veneer manufacturer for proper substance preparation and installation.

  1. Dampen properly prepared substrate for good stone adhesion.
  2. Apply ½ – ¾ inch (13-19mm) or mortar to the back of each veneer. 100% coverage is required on the back
  3. Press coated veneer firmly on substrate until mortar squeezes out around all edges of the veneer.
  4. Hold in place for 10 seconds. Ensure 100% contact between substrate and back of veneer.

Note: Not recommended for use where stone is very smooth or has a polished back.

Finishing Joints
  1. Use a grout bag to fill in joints.
  2. Finish joints, when thumb-print dry, with a metal or brush tool and dry brush any accidental smears.
For best results:
Do’s
  • Use in temperatures above 5°C (41°F).
  • Keep from freezing.

Stone Bond mortar mix is a construction grade mix designed for the installation of manufactured and natural stone. It can be used as a bond coat, scratch and brown coat and a mortar joint grout over concrete and masonry surfaces or galvanized, expanded metal lath.

Specifications

Weight

66lb

Brand

KWIK MIX

Category

KWIK MIX

Minimum quantities may apply;

  • Usually if the product comes with a variety of sizes throughout the bundle, it will be sold by the layer, which is a flat horizontal layer of the bundle. A layer is usually around 10 square feet but varies depending on the product.
  • Usually if the product comes with a single size throughout the bundle, it will be sold by the piece and not have a minimum quantity.
  • Some products are only sold in full bundles.

Additional charges may apply;

  • All stone material comes on a wooden pallet for transport and loading/unloading purposes. The amount of pallets required will depend on how much product is ordered.
  • Deliveries must include pallets, for pickup it is still recommended but not always required.
  • Pallets are charged at $40.00 and refundable at $35.00 upon return.
  • If pallets are removed from a delivery order, the order cannot be shipped and someone will contact you about shipping or pickup arrangements.

Color Variances;

  • All concrete products have a color variance between different dye lots.
  • Many concrete products come with a color range, which blends multiple colors together within the stone. Because of this some pieces may come out differently than others.
  • It is always best to come in and get a physical sample before making a large order.
Call for price
Starting from
CAD 59.99 / BAG
/
Additional fees may apply
Enter QTY As EACH On Total
TOTAL
Check stock in other branches
Your collection branch is GB Stone Inc., Caledon
SEARCH ×